Friday, February 15, 2008

Seal every nook and crany

Sealing up all rim joists, seal plate, electrical panel and old dryer vents in the basement. 15 cans should seal all airleaks in the basement.

I found that these area's are the most subseptible areas for airleaks in our house.




Electrical Panel was drafty with three 2" holes in the cinderblocks. Also placed 1" rigid foam behind the panel and spray foamed all edges.

Discovered a few more airleaks between the silplate and foundation, top / bottom of each rim joist which have to be sealed.





I also ended up replacing the cement patch around the double walled chimney. Packed the holes with cinderblock/brick pieces and re-cemented. Disconnected the stove & stovepipe.

Monday, February 11, 2008

Wood Stove in the basement

Doing a little research on how to safely enclose 10" insulated chimney. After a few trips to Home Depot and Home Hardware I am no further ahead.

The ULC rated chimney pipe label clearly states that a non combustible material must have a min of 2" of clearance from the chimney.

I have found a few good suggestions by posting on Hearth forums.

Wood stove is going to be angled on 45 against the west wall and the bathroom wall.


Shopping around for masonry product to cover the hearth pad and wall surface for the stove.